Question on OPC C258

[diwakar]

A Hearty Hello to all of you!

We have Konica Minolta C258, and recently Black Drum life has ended. And now, the printer is actually deleting all the 12x18 command through bypass. So, my question is, is it because of OPC death that our printer is not accepting 12x18 print commands through bypass ?

Thanks and Regards,

[Synthohol]

Re: Question on OPC C258

its a possibility and especially if there is a fiery.
had a toner filter message stop all printing but copying was fine.
i reset the toner filter and jobs came out.
full disclosure that happened with a fiery but im almost sure it can also happen with the emperon controller.