BH-C-3110, airprint

[Hansoon]

Anyone please have the settings needed for the BH-C-3110 to enable Airprint?
Any soft switches to set, any special firmware?

Hans

[Synthohol]

Re: BH-C-3110, airprint

AirPrint (Bonjour) setting is disabled


Solution
CAUSE: Firmware requires updating

SOLUTION: Install the following firmware based on the model. The latest version of firmware, system software or drivers is available via One Stop Product Support.

• bizhub C3110; A6DT30GJD01-951
• bizhub C3100P: A6DR30GJD01-951
• bizhub C3850/3350/3850FS; A3GN30GJ8C3-W51

Problem
AirPrint setting becomes invalid after updating to SMB 2.0 compatible firmware (G0C02-9AV to GGD01-950)

Solution
CAUSE: Firmware requires updating.

SOLUTION: Install controller version A6DT30GJD01-951. The latest version firmware is available for download via One Stop Product Support.
Note: Please install in the following order.

• Controller Firmware File name [subA6DT30G0D00-899.prn]
• Controller Firmware File name [mainA6DT30GJD01-951.prn].

[rrrohan]

Re: BH-C-3110, airprint

https://1drv.ms/u/s!Ah_79nptMOdwgZUJ9WDDnr01iGDDtQ?e=3M5l1v

[Kenny]

Re: BH-C-3110, airprint

correct me if i am wrong but i believe the c3110 also requires a HDD to be able to use airprint.