If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have konica minolta c554. when i turned on the machine there is no action until i close the front door then the machine starts up, but there's no energy on the screen.
how can i fix this problem
i have konica minolta c554. when i turned on the machine there is no action until i close the front door then the machine starts up, but there's no energy on the screen.
how can i fix this problem
always close the front door?
machine is discontinued and not supported, is there a reason you dont close the door right after powering it up?
is this something that really needs to be addressed if it works normally after you close the door?
i agree its a freaky issue but what does it really matter if it works after the door is shut.
does it shut off if you open the door when RTC?
im just relaying my personal perspective as a seasoned tech regarding an older machine and in no way is this to be considered a personal attack
you have a good reputation here with a small amount of posts so please dont see my thoughts as a dig.
We know a thing or two because we've seen a thing or two.
The medication helps though...
Comment