Fiery E100-02 Minolta C6000 Exact Software requirements for new HDD

[Creative Design]

Hi - I have an AA Error on my Fiery E100-02 Konica Minolta C6000. I have a new HDD and the all the installation disks included when the printer was installed. Can you let me know SPECIFICALLY what software I need to install on the new HDD?
Thanks, Noel

[Synthohol]

IC-413?
what version was on it?

XP or 7?
should be a disk labeled system software.

[Creative Design]

It is XP.

[Synthohol]

check your PMs.

[Creative Design]

Thanks Synthohol - I appreciate the help and I will let you know if it works. Is this file the only file I need to load onto the new replacement HDD or do I need to load additrional software?
Noel.

[Synthohol]

ok, i download poweriso and use it to emulate a virtual cd/dvd with the ISO file so it opens as a disk. you can burn one from the iso too, i just dont waste plastic.
flip the 2 service switches, connect the network cable to the computer and the lower lan port of the Fiery.
i double click installer.vbs and the install begins. follow the on screen instructions.
when done it takes a bit for the fiery to marry the copier but be patient.
use command workstation to find and assign the IP and stuff and that should be that.

forget trying to patch it, all the XP patches are unreachable and no longer useful anyway.
dont forget to calibrate it with an eye-one when done.

best of luck with your resurrection.

[Creative Design]

Thanks Synthohol - up and running again. I really appreciate your assistance.
Noel.