KM BH4050

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • scanmc
    Trusted Tech

    Site Contributor
    100+ Posts
    • Mar 2015
    • 183

    #1

    [Jamming] KM BH4050

    I have never sold or worked on one of these as this is a new customer that called for a jam code 242.01 and no paper is present. I ran a piece of mylar up through the front paper path right above the first cassette but and all seems clear so I assuming its one of the sensors. I'm logged on to the Konica's One Stop for the service manual but its not listed under documents for either the 4020 or the 4050 series? If someone has the manual they could email me or direct me to the page on the KM site that would be appreciated.
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 8007

    #2
    Re: KM BH4050

    Originally posted by scanmc
    I have never sold or worked on one of these as this is a new customer that called for a jam code 242.01 and no paper is present. I ran a piece of mylar up through the front paper path right above the first cassette but and all seems clear so I assuming its one of the sensors. I'm logged on to the Konica's One Stop for the service manual but its not listed under documents for either the 4020 or the 4050 series? If someone has the manual they could email me or direct me to the page on the KM site that would be appreciated.
    I can provide manual first thing morning. How many trays it has. This is not KM but Lexmark engine most KM techs hate them including me but they can be dogs.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5817

      #3
      Re: KM BH4050

      PM sent.

      242.01 Paper over tray 2 Pass through sensor on warmup
      N.1. bizhub 4750/4050)
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

      Comment

      • Gift
        Service Manager

        1,000+ Posts
        • Mar 2011
        • 2459

        #4
        Re: KM BH4050

        I can't recall specific any details but one time I had a prob with an actuator and several other times I needed to install the modified (green) feed rollers.

        Comment

        Working...