Before anyone red cards me...or swears at me...I DONT WANT TO RESET THE MACHINE METER, I've just replaced a DF-704 on a C368, which has done 2.7 million scans, the machine has done 250K prints. I've reset the RADF feed and RADF reverse counters, I've made a note of the scans count from when I replaced it, is there anyway of indicating that the machine has had a new RADF, apart from service records.
-
Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away... -
Re: Replaced RADF
I guess not, the entire option isn't considered as "PM/consumable" part so I guess you have to write it down somewhere or put some sort of label/sticker beside the DF's type label if you think it's that important. -
Re: Replaced RADF
Besides feed and reverse counts I would go in Counter > ADF paper pages and clear this also plus adding new DF serial into Stop + 3 procedure.A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.Comment
Comment