Have you ever seen this? I can make copies thru the DF and it comes fine, I put it on the glass and it comes with a little smudge and what looks like out of focus.
Cleaned all the glass, the rails, checks rhe little platic sliders on the mirrors, etc
It is the 3rd machine I see with this, with less than 70k. Printing from memory it comes ok, like the test page or config page
1st photo is from glass, second is from DF and from copier memory
Thanks
Cleaned all the glass, the rails, checks rhe little platic sliders on the mirrors, etc
It is the 3rd machine I see with this, with less than 70k. Printing from memory it comes ok, like the test page or config page
1st photo is from glass, second is from DF and from copier memory
Thanks
Comment