C4080 single click

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kenpio
    Trusted Tech

    100+ Posts
    • Dec 2015
    • 199

    #1

    C4080 single click

    Morning people,
    I know that I have answered this question here. It has been a long time and cant find it in the manual. I know that it is a zone thing, but where? Just wondering where it is to change 11x17 to single click?
    Thanks
  • lartis.aineias
    Technician

    50+ Posts
    • Dec 2020
    • 78

    #2
    Re: C4080 single click

    Originally posted by kenpio
    Morning people,
    I know that I have answered this question here. It has been a long time and cant find it in the manual. I know that it is a zone thing, but where? Just wondering where it is to change 11x17 to single click?
    Thanks
    Go to meter counter stop 00 stop 01 and stop 0C

    Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

    Comment

    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5793

      #3
      Re: C4080 single click

      Why would you want to?
      It fucks up the consumable life.
      On the meter sheet the count under "large" is 11x17.
      Just subtract that number from the total count to "charge" single clicks on 11x17

      The machine will always have premature failure of consumables because it's not reflecting actual usage.
      If this was "fixed" in these newer production machines I recind my statement.
      I'm going by what I have seen in the c6xxx series.
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

      Comment

      • kenpio
        Trusted Tech

        100+ Posts
        • Dec 2015
        • 199

        #4
        Re: C4080 single click

        Yes I know it is bad. This is what the customer wants, a penny pinching printer. I know that the PM counter counts the same. So that is what I am dealing with. He has wanted this for every production machine.

        Thanks

        Comment

        Working...