C258 white spots from cyan only

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7976
    #16
    Re: C258 white spots from cyan only

    Originally posted by copyman
    I wouldn't adjust any voltages, etc. I have many of the 4 & 8 series that I've never had to make any adjustments for quality issues. Just go into service mode and add cyan toner until you see the levels go up. This is the first thing I would try and doesn't cost anything but 10 mins of your time!

    By the way not sure if anyone asked, are you using genuine toner?
    He-he wise man
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

      Comment

      • copyman
        Owner / Technician

        Site Contributor
        2,500+ Posts
        • Sep 2005
        • 4624
        #17
        Re: C258 white spots from cyan only

        Originally posted by Scarekrow
        So today I tested and it seemed to be better, I manually added toner and tested again and those white missing bit have now gone all together so it must have been just a bit of damp effecting the cyan.

        Thanks for all your helpful advise.
        No it wasn't a bit of damp it was a bit of low on developer. As I tried to tell you in my first post. I gave you the ammunition but you just didn't want to fire the gun

        Anyway glad you got it going.

          Comment

          • Scarekrow
            Technician

            50+ Posts
            • Feb 2012
            • 80
            #18
            Re: C258 white spots from cyan only

            Originally posted by copyman
            No it wasn't a bit of damp it was a bit of low on developer. As I tried to tell you in my first post. I gave you the ammunition but you just didn't want to fire the gun

            Anyway glad you got it going.
            Yes, you're right, I didn't think it through, with the levels being ok, the mag roller looking fine and the low colour print count, I overlooked what you said or it didn't seem to make sense. Walking away for a day and returning with a clear mind helps.

              Comment

              Previous 1 2 template Next
              Working...