KonicaMinolta bizhub C200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • qbert
    • Jun 2025
    #1

    KonicaMinolta bizhub C200

    Hi all,
    I have a konica bizhub C200, and want to know how to update the firmware. The machine has the eth port, usb and com.
    To upgrade the fw, I need a particular device or can be done through eth?
    Also read about the "C250/252/300 and C352 IU reset" could also work for my model ?
    Last question, i can update my fw with that of C250 or C3xx?
    If you need further details of the machine ask me
    Thanks to all
    Tags: bizhub, bizhub c200, c20, c200, drivers, konica, konica minolta, konicaminolta, minolta, printer firmware, software, update, usb
    • JSC
      Gimp

      500+ Posts
      • Dec 2006
      • 618
      #2
      PDF shows you how to update the main firmware, for the printer firmware you copy it to a CF card the same way but you need to enter the service mode and select firmware up grade. the firmware only works for the bizC200.
      As far as i know you can not reset the IU`s yet.
      The gene pool could use a little chlorine.

        Comment

        • h4141
          #3
          Konica Minolta Bizhub C200
          There are drivers here
          and software update.

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              I want to repair my transmission, I am not a trained mechanic and I don't have any manuals or tools. Can someone please send me the instructions so I can attempt this myself? The only person who is going to be happy with this outcome is the factory mechanic who will eventually spend twice the time fixing what I screwed up and charging me double for his time. Why don't you just call a KM tech???? Let me know how much you wind up spending on your flight of fancy. Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                • RRodgers
                  Service Manager

                  1,000+ Posts
                  • Jun 2009
                  • 1947
                  #5
                  Originally posted by emujo
                  I want to repair my transmission, I am not a trained mechanic and I don't have any manuals or tools. Can someone please send me the instructions so I can attempt this myself? The only person who is going to be happy with this outcome is the factory mechanic who will eventually spend twice the time fixing what I screwed up and charging me double for his time. Why don't you just call a KM tech???? Let me know how much you wind up spending on your flight of fancy. Emujo
                  /like.
                  Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                    Comment

                    Previous template Next
                    Working...