Bizhub C7000 Error code C- D0E2

[tulintron]

Good afternoon people.
I have bulletins saying how to fix the FW GMO-40. I don't have it in my data.


Would anyone kindly help?


Thanks.

[tulintron]

Re: Bizhub C7000 Error code C- D0E2

We update the printer, we update the controller, we replace the HDD (P), we format the HDD (P), we change the memories of the PH-102 kit.


The controller had an error in the update - SC 30-003.


The controller does not complete the update.

[Synthohol]

Re: Bizhub C7000 Error code C- D0E2

Error
C-D0E2

Root Cause
C-D0E2 after installing the PH-102/HD-514.

Workaround/Fix
PROBABLE CAUSES:
1. One of the two Memory Control Boards is not seated correctly.
Remove and reseat the boards.

2. Memory Control Board/1 and Memory Control Board/2 are installed in the incorrect positions on the PH-102 board.

[tulintron]

Re: Bizhub C7000 Error code C- D0E2

Good Morning. Exactly, Synthohol. Procedure completed, but the printer persists in the error. Two bulletins I have say about this FW I don't have. It was my hope. I removed all the parts involved and brought it to the laboratory. I will mount on another printer now and later have the answer. I let you know

[tulintron]

Re: Bizhub C7000 Error code C- D0E2

The error is in the controller IC-601 SSD.


Has anyone ever needed to replace this SSD at some point in their life?