Konica C360 from print out black full image background error. I am change new black drum set. But I have same problem. 
-
-
Re: Konica C360 black short print error
Check the corona connectors of the machine
edit: background is 100% black?Last edited by L0rdC; 11-14-2022, 09:26 AM. -
Re: Konica C360 black short print error
Are there image voids on he prints? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Konica C360 black short print error
Please check my machine print out attached file.Comment
-
Re: Konica C360 black short print error
Faulty K dev drive clutch... Then I checked your sample. So no.
Please try to get somthing clear to look at. I have seen a faulty MFPB do just that.
But you first need to fix the QC issues.WhateverComment
-
Re: Konica C360 black short print error
I am new change high voltage unit change. Finally, it is convenient. Thank you all very much.
Comment
Comment