New SSD bizhub C-224e

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CP-1015
    Trusted Tech

    Site Contributor
    250+ Posts
    • Nov 2020
    • 298
    #1

    New SSD bizhub C-224e

    I installed a new SSD in a C224e. In the absence of installation instructions, of course, cyan and magenta lines. Installation instructions are now available. How do I proceed? Have I tried deleting and reinstalling again with reset tool without success? The serial numbers, for example, have remained. Thanks in advance!
    Tags: advance, installation, instructions, ssd
    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7911
      #2
      Re: New SSD bizhub C-224e

      Do Stop + 3 setup...
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

        Comment

        • Synthohol
          Certified Konica Expert

          Site Contributor
          5,000+ Posts
          • Mar 2016
          • 5737
          #3
          Re: New SSD bizhub C-224e

          Originally posted by CP-1015
          In the absence of installation instructions,
          you are a contributor, just ask for them next time
          We know a thing or two because we've seen a thing or two.
          The medication helps though...

            Comment

            • Elmo
              Senior Tech

              Site Contributor
              500+ Posts
              • Feb 2010
              • 541
              #4
              Re: New SSD bizhub C-224e

              20221116151842105.pdf
              I Used To Live To Fix Things Now i Fix Things To Live

                Comment

                • CP-1015
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Nov 2020
                  • 298
                  #5
                  Re: New SSD bizhub C-224e

                  Originally posted by tsbservice
                  Do Stop + 3 setup...
                  I did: Stop - 1 - 1 - 4 - 4 - c. Was it wrong? I thougt Stop + 3 is for 8-series?
                  Last edited by CP-1015; 11-16-2022, 05:38 PM.

                    Comment

                    • CP-1015
                      Trusted Tech

                      Site Contributor
                      250+ Posts
                      • Nov 2020
                      • 298
                      #6
                      Re: New SSD bizhub C-224e

                      Originally posted by Synthohol
                      you are a contributor, just ask for them next time
                      Ok, netxt time. But how I have to reset before insatll procedere after my foult? I tried with reset tool again, but it wasn't successfull. For excample serial numbers aren't deleted.
                      Last edited by CP-1015; 11-16-2022, 05:48 PM.

                        Comment

                        • tsbservice
                          Field tech

                          Site Contributor
                          5,000+ Posts
                          • May 2007
                          • 7911
                          #7
                          Re: New SSD bizhub C-224e

                          Did you update firmware after SSDB replacement?
                          Enter service mode and press stop and 3 to start initial setup of date and time etc.

                          P.S. As I'm comparatively freshman with KM I never installed brand new 4e series machine so I may be mistaken about initial setup. Just try.
                          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                            Comment

                            • CP-1015
                              Trusted Tech

                              Site Contributor
                              250+ Posts
                              • Nov 2020
                              • 298
                              #8
                              Re: New SSD bizhub C-224e

                              Originally posted by tsbservice
                              Did you update firmware after SSDB replacement?
                              Enter service mode and press stop and 3 to start initial setup of date and time etc.

                              P.S. As I'm comparatively freshman with KM I never installed brand new 4e series machine so I may be mistaken about initial setup. Just try.
                              OK, I'l try it today.

                                Comment

                                • CP-1015
                                  Trusted Tech

                                  Site Contributor
                                  250+ Posts
                                  • Nov 2020
                                  • 298
                                  #9
                                  Re: New SSD bizhub C-224e

                                  Perfect! Thanks everyone! Firmware I datet up for start after SSD replacement.

                                    Comment

                                    Previous template Next
                                    Working...