Machine came up with C-6753. Did all the advised here in the forum anf manual for such cases. LED-Lamp remains dead and is not lighting immediately as usual when starting up the BH-C-284e.
Removed the DF-701 and the DSIPB as well as all options such as fax-board and LAN cable. Did of course, the trouble reset procedure, but the problem still exists.
Have a donor machine, BH-C-224e, for eventual needed boards, but that one is in storage far, far away from here in a cruelly cold unheated warehouse and to reach the machine, which is on a high shelf, it would need a forklift.
Would love to avoid this all. Any other ideas than swapping boards please?
Hans
Removed the DF-701 and the DSIPB as well as all options such as fax-board and LAN cable. Did of course, the trouble reset procedure, but the problem still exists.
Have a donor machine, BH-C-224e, for eventual needed boards, but that one is in storage far, far away from here in a cruelly cold unheated warehouse and to reach the machine, which is on a high shelf, it would need a forklift.
Would love to avoid this all. Any other ideas than swapping boards please?
Hans
Comment