C300i and laser

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • and
    Technician

    50+ Posts
    • Oct 2011
    • 95

    #1

    C300i and laser

    If you a have something like this
    Gradation.pdf
    clean polygon mirror of laser.
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7929

    #2
    Re: C300i and laser

    Originally posted by and
    If you a have something like this
    [ATTACH]56450[/ATTACH]
    clean polygon mirror of laser.
    Thanks for heads up but your example is a mess, next time do halftone pattern much better to look at.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • Gift
      Service Manager

      1,000+ Posts
      • Mar 2011
      • 2449

      #3
      Re: C300i and laser

      Hard to believe this is caused by a dirty polygon motor - perhaps fiddling around with the LD unit / connectors solved another, hidden issue.

      Comment

      • and
        Technician

        50+ Posts
        • Oct 2011
        • 95

        #4
        Re: C300i and laser

        Originally posted by tsbservice
        Thanks for heads up but your example is a mess, next time do halftone pattern much better to look at.
        Sorry, i have only a M gradation.
        M.JPG

        Comment

        Working...