Double Print and typically zoomed in printing

[Umatech18]

I am trying to figure out what unit or board thats doing this
I have done the following:
-changed transfer belt
-changed laser board
-changed voltage board

Bizhub c224

[Umatech18]

Re: Double Print and typically zoomed in printing

I am trying to figure out what unit or board thats doing this
I have done the following:
-changed transfer belt
-changed laser board
-changed voltage board

This is the photo of the demo page

[rrrohan]

Re: Double Print and typically zoomed in printing

-changed laser board

so not the actual laser just the board it plugs into?

Id be doing the entire laser

[femaster]

Re: Double Print and typically zoomed in printing

I'll second the laser unit. Have had a couple go out with similar symptoms. You can try cleaning the ID sensors under the transfer belt, but I'm leaning very heavily towards faulty laser unit.

[allan]

Re: Double Print and typically zoomed in printing

That is seriously out of wack. It could be heavy strain on the drive from one of the unit as well. Does all the drums and transfer belt turn freely.
Like mentioned changing the laser unit and the IDS sensor assy could help.

[Umatech18]

Re: Double Print and typically zoomed in printing

I'll second the laser unit. Have had a couple go out with similar symptoms. You can try cleaning the ID sensors under the transfer belt, but I'm leaning very heavily towards faulty laser unit.

Thanks that helped solve the problem🙂🙂

[Umatech18]

Re: Double Print and typically zoomed in printing

so not the actual laser just the board it plugs into?

Id be doing the entire laser

Thanks that was the actual problem.. Thank you for yr help🙂🙂