[Misc] Konica c6000 wierd upside down display

[n893]

Hi everyone...
i got abit wierd problem just now... my machine display showing upsidedown image...

1. Already switch display
2. Already switch ipb

But nothing happend...

Please help...

Thanks everyone

[wjurls]

Re: Konica c6000 wierd upside down display

Did this happen after swapping the control panel for another? I haven't seen this on the C6000 series yet. On the 951, 1052, 1250 series, there was an op panel change somewhere mid run. If you swap one style for the other you get an upside down display.

[techsxge]

Re: Konica c6000 wierd upside down display

lol 🙃

[tulintron]

Re: Konica c6000 wierd upside down display

Did this happen after swapping the control panel for another? I haven't seen this on the C6000 series yet. On the 951, 1052, 1250 series, there was an op panel change somewhere mid run. If you swap one style for the other you get an upside down display.

Exactly. I've done tests with other panels and what happens from 1250 to C7000 is exactly that. He must have exchanged the panel for another reason and got this gift.

[n893]

Re: Konica c6000 wierd upside down display

Did this happen after swapping the control panel for another? I haven't seen this on the C6000 series yet. On the 951, 1052, 1250 series, there was an op panel change somewhere mid run. If you swap one style for the other you get an upside down display.

Yes... we have 6 machine 3 for part and 3 for running... somehow the display just died and we try to swap it with other... after trying to disamble the display we notice the board and backlite board was very diffrent

Thanks all for replaying...