Bizhub 500 c-183

[Vesigoth]

starts initializing & then pops c-183

what is that ?

[copytechman]

U sure thats correct? Codes are typically 4 digits on that series of machines!
Eg- C-0202

Regards!
A.

[Vesigoth]

it's C-C183

[copytechman]

From Da Book:

Software
abnormality
C-C183 The machine type mentioned in
the software is different between
the overall control and the image
control.

Typically occurs when a firmware mismatch occurs (eg installed an main driving board with 420 firmware into a 500,

my solution: reflash machine with correct firmware.

Regards!
A.