B161F Black copies

[Guest]

Hi, I seem to be having a recuring problem on this range of m/c in that the exposure lamp will not come on when placing a document on the glass or through the document feeder, you then have to unplug the m/c from the wall socket to reset. Have first tried replacing power supply and then "pwb P" it will then work but the problem reoccurres, weeks some times months later.

[Cantechman]

The ribbon cable that runs from the ccd unit to the pwb-b board can cause issues. I would replace that to see what happens.

[deep]

Also check the lamp voltage regulator inside the scanner unit.