Bizhub PRO C6500 horizontal lines in print / drodas78

[drodas78]

Hi. Thank you to all the people who post. I have done what dogsbody said, the magenta and cyan was with trouble. Then I have done what suggested mrwho and herrmann and every thing is working fine. The printings looks great. Thank you very much for all your help. This forum is great!

[drodas78]

Yes thanks, I guess the key is to keep the filters clean to allow as much airflow as possible....do you guys reduce the number of filters in the big filter box? I think we take out at least 3....since those 3 never get toner in them even after a full PM cycle....but even with those missing, we still get the toner drop/laser blocked issue from time to time....

A friend tech, aspire the filters with a compressor every time he check a machine. Do you think this to be a good idea to allow airflow? Or can this be bad for the machine?

[mecanico]

halftone white lines

We have few customers, but this effect is present only where they cut the paper themselves. If the customer buy a packed paper there is not problem.

The fact the customer cut their paper because is cheaper and they use offset paper only. No laser paper.

Solution: give an air spray bottle (photografy aerosol) to the customer and to explain how use it!

Thanks.