Minolta EP 2030

[deep]

C05 is a fuser related problem so I would suggest you should have a professional to handle it.

[minimerlin]

Thanks. Will look into this. See what I can see but it looks quite complicated.
Is the fuser the purple drum?

I agree with Deep! If you do not know the fuser from the drum..time to call a tech.

[Kmdurrin]

I agree with the last two posts. This could become a VERY expensive fix if you do anything to damage the drum.

[farazharoon]

Thanks

Thank you everybody that has given input.
I took your advice and called the people who sold the machine.
They told me to open up the back on the green circuit board look for a TROUBLE button. That reset it. They said it was probably a low voltage problem.

It turns out we have too low voltage here for the machine to work. Sometimes it drops down to 170 volts and that causes the machine to turn itself off. He said it needs 220 volts to run. And I think he is right because when I run it on our generator it turns fine and makes copies and does not turn off.

So need to find a way to maintain the line electricity at 220v. And suggestions for low voltage?

[copytechman]

Uhmmm low voltage? Call an electrician / power supplier?

Regards!
A.

[minimerlin]

Get the hamster to run faster on its wheel!!LOL