C- D010 service code bizhub C451

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Zilviux
    Technician
    • Apr 2009
    • 32
    #1

    C- D010 service code bizhub C451

    Hello I was printing 100 copies A3+ prints and on 5 copy electricity shutdown for 5 seconds, so then i turn off the machine and take out paper and turn on machine, then apears servise code (different) but not instantly. Its boot ups and then finishing stabilisation it try to print and shows old job but when it's starts it's stops instant and show code (different). so i will try trouble resset, then error clear in service mode, doesn't help. so i have done physical HDD format and after that shows code C- D010 and don't find solution
    Tags: bizhub, c451, chips, code, d010, error, error code, image, image unit, locks, mfp board, ops, rebooted, service, set, unit
    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299
      #2
      Although this won't probably solve your main problem, you must remember that everytime you do a physical format on a HD you should always do a logical format next.

      I don't have a manual here handy, but I would bet money that code you're getting is because of that.
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • Zilviux
          Technician
          • Apr 2009
          • 32
          #3
          Yes it help but now another code apears C- D252 is still with hdd problems?

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              Originally posted by Zilviux
              Yes it help but now another code apears C- D252 is still with hdd problems?
              Sorry, I have no data for that one. Can't help you there. Maybe someone else can. Good luck!
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                • copytechman
                  Senior Tech

                  Site Contributor
                  500+ Posts
                  • Nov 2008
                  • 926
                  #5

                    Comment

                    • Zilviux
                      Technician
                      • Apr 2009
                      • 32
                      #6
                      I fix it just was set image controller to 1 than 0 and thats all Thank you very much

                        Comment

                        • opensky
                          #7
                          image unit

                          how do you set the image to 1?

                          I changed the chips in my IU's and then when I rebooted the machine it gave me the error code c-d252 and locks me out.

                            Comment

                            Previous template Next
                            Working...