konica c 500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thuo
    Trusted Tech

    100+ Posts
    • Feb 2008
    • 155
    #1

    konica c 500

    what is error code sc 46-21 in konica c500
    Tags: 500, konica, lef, oacb, prcb, sea
    • thuo
      Trusted Tech

      100+ Posts
      • Feb 2008
      • 155
      #2
      konica C500

      What is error code sc 46-21 in konica c 500

      thanks

        Comment

        • JSC
          Gimp

          500+ Posts
          • Dec 2006
          • 618
          #3
          E46-21 Expansion process from memory
          to page memory is not
          completed within the specified
          time.
          Compression process from
          page memory to memory is not
          completed within the specified
          time.
          Evolution from memory to page
          memory is not completed
          within the specified time.
          Compressed data transfer from
          memory to memory is not completed
          within the specified time.
          The gene pool could use a little chlorine.

            Comment

            • thuo
              Trusted Tech

              100+ Posts
              • Feb 2008
              • 155
              #4
              KONICA C 500

              What is the way to go in this problem sc46-21

                Comment

                • mrwho
                  Major Asshole!

                  Site Contributor
                  2,500+ Posts
                  • Apr 2009
                  • 4299
                  #5
                  Originally posted by thuo
                  What is the way to go in this problem sc46-21
                  It's hard to say. You could have a defective board. One of the following:

                  Printer control board (PRCB)
                  Image processing board (IPB)
                  Program of overall control board (OACB)

                  Try to recheck all of the connectors.
                  ' "But the salesman said . . ." The salesman's an asshole!'
                  Mascan42

                  'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                  Ibid

                  I'm just an ex-tech lurking around and spreading disinformation!

                    Comment

                    • JSC
                      Gimp

                      500+ Posts
                      • Dec 2006
                      • 618
                      #6
                      Originally posted by thuo
                      What is the way to go in this problem sc46-21
                      You could start by re-seating or replacing the memory sticks
                      The gene pool could use a little chlorine.

                        Comment

                        • edmund
                          Technician
                          • Jul 2009
                          • 29
                          #7
                          Does the error come up immediately does the machine predrive
                          what I am trying to determine what stage of the boot proccess the machine give this code .If it is early while the sub power switch is turn on then it could most likely be the ORCB board if it 's a couple of seconds later it could be the PRCB
                          The service manual lays mentions these board pertianing to this error code

                            Comment

                            Previous template Next
                            Working...