Auto Document Feeder BizHub210

[ravikumarj]

Every single original feeds in primary then get jammed.
Any sensor or the board in ADF.
I ve removed, cleaned the feed rollers and sensor.
Kindly help me with solution.
Thanks in advance.
Ravi.

[moonwalker3778]

there is a pre scanning sensor,just before the original turns in to platen glass,opposite to that sensor one Mylar sheet is there that may be worn out or deformed. hope this helps you

[ravikumarj]

Document feeder Biz hub 210

Thanks for the post, I found there is no obstruction of mylar, I ve already fed thick sheet and cleared the path.
It takes the primary feed then it stops in the glass.
Any sensor can be suspected?
Ravi.

[Rudi]

The hook of feeder lock lever might be broken on the rear side.