Does anyone have either the components to rebuild or have rebuilt ready-to-go units? I will need a few of each
Minolta 3102 Need Imaging, Fuser & Transfer stuff
Collapse
X
-
I have 2 brand new 2002s still in the box, sans the print controllers. If you are serious, I may be able to sell you both for a good price. $1700 each, you pay shipping. I would have to get an OK from the owner.The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking -
texasatm12
Comment
-
-
Comment
-
Comment
-
RE: fuse the belt and fuser
Can you provide instructions on how to fuse the belt and fuser??
This is my first post but I must say thank you to all who post in this forum.Comment
-
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals
Paul@justmanuals.comComment
-
I will sell both new 2002's and a working used 3102 for $3000, buyer pays shipping.The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen HawkingComment
-
CF3102 IU chips
Hey,
Copylite sells the reset chips for all IU's for $15.50 outright.For folks in the northeast you can send your chips to copierchip.com and he'll reset your chips and ship them back to you free of charge for $12.50 each you can normally get 2x's the life out of these units w/no Issues. I know the guy copierchip.com he's an absolute genius (we worked y=together for a couple years).CopierChip.com he'll treat you right he also does it for the C250/252/300/352 and the c451/550/651. Hope this helps !Comment
Comment