If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have the konicaminolta copier bizhub C6501 . after print around 100 sheets its stop and apear the error C-4701 .
HOW CAN RESOLVE THIS PROBLEM
THANKS FOR ALL
I have the konicaminolta copier bizhub C6501 . after print around 100 sheets its stop and apear the error C-4701 .
HOW CAN RESOLVE THIS PROBLEM
THANKS FOR ALL
Image processing abnormality
C-4701*
Address abnormality of FIFO for printer. Expansion of scanned image data is not correctly completed.
possible problem areas.
Printer control board (PRCB)
Image processing board (IPB)
I/F board (IFB)
Image memory control board (IMCB)
Check your memory, and all connections related to the above boards. Reflash firmware.
start replacing boards one at a time.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
I had the same problem a few weeks ago, turns out to be the IMCB
If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!
Comment