Konica 8050 error SC81-01

[Coptech]

That is not for extra paper storage no matter how much it looks like a good polace to store paper. You are correct in that it stopped the tray lift. If you took all the paper out except for the paper that is supposed to be there, and turn the machine off and on, does it work again? Is the tray indication on the display normal or is it grayed out?

[copyplus]

That is not for extra paper storage no matter how much it looks like a good polace to store paper. You are correct in that it stopped the tray lift. If you took all the paper out except for the paper that is supposed to be there, and turn the machine off and on, does it work again? Is the tray indication on the display normal or is it grayed out?

I tried to turn the machine on and off taking all the extra paper out. The paper tray indicdation is blinking and add paper in tray one is displaying on the screen.

[Coptech]

Usually, when there is something stopping the tray lift, the machine will disable that tray and has to be reset using a different dipswitch setting. However, they gray out the paper tray on the display when they do. If it is still blinking, it sounds to me like it popped a cable, or an ICP that drives the lift motor. I honestly think you need on-site service on this one. I could be wrong, but it sounds more serious to me. If there is no local service, call 1-800-456-6422 and they will help you find a nearby service center.

[copyplus]

what is the procedure to enable the tray in the service mode?

[copyplus]

If I click on the tray one indicator on the panel it greys out and stops blinking.

[Coptech]

same 25 mode but this time set switch 18-0 to off

[scallanjoe@yahoo.com]

The machine was running ok and turned the machine off. Few days later I turned it on and I am getting Error code SC81-01. Will someone let me know what this code means and how I can get rid of it. thanks

hay i am unemployed 9years w / konica direct how much do they pay well trained techs
up there in canada

[copyplus]

Thank you very much. The problem is solved with 18-0. Great help

[Nisar235]

hi
dear its PRCB (printer control board) has been damaged. when you will replace it and you will also give the serial no of this machine to its memory and this way your problem will remove.
regards,
nisar khan
Pakistan

[copyplus]

HI
My copier colorforce 8050 prints very dark even setting up from the document printer set up mode to 85% bright. Moreover, the blue is printed purplish. Is there any set up to reduce the darkness of colors for digital printing. thanks

[copyplus]

I did not get any response from anyone yet. Would anyone let me know how to caliberate the colors. My machine colorforce 8050 is printing dark and blue is purplish.

[scallanjoe@yahoo.com]

I did not get any response from anyone yet. Would anyone let me know how to caliberate the colors. My machine colorforce 8050 is printing dark and blue is purplish.

1st have you cleaned p / heads/m-c grid & wiress/,
2ed is the problem off the glass or print' if print are you useing comand work ststion,
3rd what dose the density out put charts look like
4th do you have a s/man i can just give you page #'s other wise there's a lot of typing

[copyplus]

1st have you cleaned p / heads/m-c grid & wiress/,
2ed is the problem off the glass or print' if print are you useing comand work ststion,
3rd what dose the density out put charts look like
4th do you have a s/man i can just give you page #'s other wise there's a lot of typing

1. Yes
2. both
3. printed a test chart. The Blue and Magenta seems ok but the yellow is greenish and black is reddish.
4. I dont have sm for this particular model but have some other manuals. I don't know which other machine is compatible with colorforce 8050.

[scallanjoe@yahoo.com]

1. Yes
2. both
3. printed a test chart. The Blue and Magenta seems ok but the yellow is greenish and black is reddish.
4. I dont have sm for this particular model but have some other manuals. I don't know which other machine is compatible with colorforce 8050.

GOOD / HOW ARE THE TRANSFER ROLLERS INSIDE THE THANSFER BELT
KONICA'S c500 & (MINOLTA'S CF1500 ) I THINK IT'S CF1500
ANYWAY SEND ME A E/ M ADDRESS I CAN SEND YOU A 8050 BOOK

[copyplus]

aldycopy@hotmail.com