konica 7033 no lcd display

[mdm7266]

iswtrns utility

Would anybody kindly share this utility with me?

nospam@rex-technica.com

Thanks

Hans

i look at the ISWtrns utilty on my email and found out that the download is no longer available. maybe you could ask for member barratec for the firmware to activate the download again. it may require his permission on his mail

thanks

[barratec]

i look at the ISWtrns utilty on my email and found out that the download is no longer available. maybe you could ask for member barratec for the firmware to activate the download again. it may require his permission on his mail

thanks

Hi mdm7266,
if you give me your email address i'll send you the link to download ISWtrns utilty. My mail is : barratec@tiscali.it

Bye.

[fvincent]

Re: konica 7033 no lcd display

Kind Sir. Could I have a copy of the ISWtrns utility as described. I will be greatly in your debt!

Thanks,
Floyd

floydvincent@verizon.net

I attached the system (v.45) and image (v.26) firmware to write via parallel cable and ISWtrns utility.
If you need this utility too send me a email address.

[letragraphics]

Re: konica 7040 ISW trns utility software

I attached the system (v.45) and image (v.26) firmware to write via parallel cable and ISWtrns utility.
If you need this utility too send me a email address.

HI! May You please send me the ISW transfer utility software for konica 7040 at letragraphics@yahoo.com

[mdm7266]

Re: konica 7033 no lcd display

hello there again. i have a new problem with my main control board. when i turn the power switch on, (left rear side) i hear clicking sound as if a relay on power supply2 is turn on, but no machine reaction and no lcd display. this time no led is on on panel. i replaced the control board with spare and it work fine. Now my question is can i repair the control board? i suspect that a fuse is blown on control board (no display board) or do i need to flash the board?

i have also another control board that when i replaced with it, a code F80-4 is indicated on lcd screen also even i replaced the parameter board on top of it. What can i do to correct this error? thanks

[mdm7266]

Re: konica 7033 no lcd display

help.. anyone there who want to share to me the utility firmware for konica 7033. need to flash the control board.. thanks