FTP scan in the shared network storage?

[sprawl]

Hi,

Is it possible to use example C280 "Scan to FTP" in the Buffalo linkstation?

I try to allow any traffic in buffalo admin panel and set ftp settings in the copymachine:

"Host": 191.167.1.98
"target": disk1\shared
"port": 21
"admin" "password"

C280 always tell about "no specified folder".
If i try in the firefox url ftp://adminassword@191.167.1.98/disk1/shared" it is correct.

So, is this even possible to scan buffalo?

[B0265]

I'm not familair with the Buffalo Linkstation, but if it is acting as a ftp server and ftp root folder is "shared" it should work to type only "\" as the file path on the copier.

[mascan42]

The FTP scan automatically defaults to the FTP root folder. You only need to enter any subfolders that you want to scan to. Other than that, a "/" or a "." will do to scan just to the root folder.

[sprawl]

if i use "\" or "." -> always says "no specified folder".



edit:

I dont know 100% sure if all settings is right in the buffalo(linkstation live LS-CH500L).

There is allowed all users in all folders, and "FTP" is selected each folder.