Old CS Pro EP 4000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RRodgers
    Service Manager

    1,000+ Posts
    • Jun 2009
    • 1947

    #1

    Old CS Pro EP 4000

    How do I clear the tray error codes? I have codes for tray 1-3 Also a C0914. (tray 2 lift error) I can't seem to clear them. Hitting the trouble reset button under the cover that is on the inside of the door does not clear them or reset them. I've been in tech mode (stop 0, 0 stop 1) (stop 0,0 stop 0 1 ) didn't work.

    Thoughts?
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
  • KonMan
    Technician
    • Mar 2010
    • 15

    #2
    I'm not sure about the 4000, but the older Minolta machines had a reset button. It may be located on a small panel in the front of the machine , or on the main PWB.

    Comment

    • Luther
      Senior Tech

      500+ Posts
      • May 2006
      • 682

      #3
      When the code is displayed open and close the front door if the code isn't displayed and you have the little wrench touch the wrench display the code and open and close the front door.......good luck

      Comment

      • RRodgers
        Service Manager

        1,000+ Posts
        • Jun 2009
        • 1947

        #4
        I'll give that a shot Luther. One thing, tray 2 has a broken gear. Anyone have a parts man for this box? I don't see it listed on Konica's web site anymore. Although the all active solutions for it is still listed.
        Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

        Comment

        • Cantechman
          Trusted Tech

          Site Contributor
          100+ Posts
          • Nov 2008
          • 228

          #5
          Is it the white gear with teeth on each side and a nothing in the middle? I believe its 16/40T or something like that.

          Comment

          • RRodgers
            Service Manager

            1,000+ Posts
            • Jun 2009
            • 1947

            #6
            Originally posted by Cantechman
            Is it the white gear with teeth on each side and a nothing in the middle? I believe its 16/40T or something like that.
            Yeah, that might be it.
            Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

            Comment

            • Cantechman
              Trusted Tech

              Site Contributor
              100+ Posts
              • Nov 2008
              • 228

              #7
              That particular gear is part # 4425-3212-01 gear 16/40T

              Comment

              • RRodgers
                Service Manager

                1,000+ Posts
                • Jun 2009
                • 1947

                #8
                I'll take a pic of it with my phone and post it. I"m pretty sure we are talking about the same gear though.
                Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                Comment

                • RRodgers
                  Service Manager

                  1,000+ Posts
                  • Jun 2009
                  • 1947

                  #9
                  Ok here is a shot (a very crappy one at that) of the gear I am refering too. Is this it?
                  Attached Files
                  Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                  Comment

                  • RRodgers
                    Service Manager

                    1,000+ Posts
                    • Jun 2009
                    • 1947

                    #10
                    Originally posted by Luther
                    When the code is displayed open and close the front door if the code isn't displayed and you have the little wrench touch the wrench display the code and open and close the front door.......good luck
                    Yeah that did it. Thanks!
                    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                    Comment

                    • Luther
                      Senior Tech

                      500+ Posts
                      • May 2006
                      • 682

                      #11
                      go to precisionroller.com they have all the gears for that box and pictures of them...........good luck again

                      Comment

                      • RRodgers
                        Service Manager

                        1,000+ Posts
                        • Jun 2009
                        • 1947

                        #12
                        Thanks man... looks like KM still might have them as well. So we are going that route.
                        Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                        Comment

                        • aleksander
                          Trusted Tech

                          250+ Posts
                          • Jan 2010
                          • 378

                          #13
                          try Stop, 0, Stop, 1.
                          Open & close front door

                          Comment

                          Working...