Bizhub Pro c500 fixing problem!

[Mikey]

Hello, and thanks for quick response.
I've done that things that you're told me. I clean everything and the lines on the left on print disappear. But i print on coated paper, and if i set up the normal 4 the image isn't good fixed on the last 7-8 cm. Better if i set the coated 4 or 5 but isn't good. all time tle last 7-8 cm don't have gloss mode and sometimes isn't fixed ok.

Replace the pressure roller.

[Albonline]

all the heat is bing sucked out of the fixing rollers by your paper stock. set paper settings to thickest stock possible and see if the problem goes away. if it does then test/replace fuser temp sensors/printer driver board. there could also be mechanical problems with the fuser. you should refer your problem to a local konica certified tech.