Di3010 no display

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Glitch
    Junior Member
    • Jan 2010
    • 7
    #1

    Di3010 no display

    Can't find any reference to "no display" in the service manual. The machine fires up but no display. Nothing happens when the start button is pressed. Has anyone had experience with this problem? Power Supply? Control Panel? TIA, Glitch
    Tags: button, change, control, control panel, di30, di3010, display, glitch, incorrectly, lef, manual, nec, panel, power, power supply, pressed, replace, screen, service, service manual, start, supply, touch screen, work
    • deep
      Trusted Tech

      100+ Posts
      • Jun 2008
      • 208
      #2
      I would reseat the connectors of the control panel. Replace the control panel/touch screen if the remedy doesn't work.
      Kenny

        Comment

        • fixthecopier
          ALIEN OVERLORD

          2,500+ Posts
          • Apr 2008
          • 4714
          #3
          First try to reseat the card on the mfb. Next rewrite the card or swap with another. Last, change the MFB.
          The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

            Comment

            • mo0651
              Service Manager

              1,000+ Posts
              • Apr 2009
              • 1054
              #4
              have you added anything to this copier? connector on mfb board in the back just under adf, if it's loose could cause this.

                Comment

                • KEVIN900
                  Copier Ninja

                  100+ Posts
                  • Oct 2009
                  • 200
                  #5
                  When I used to set up these in the shop, if you connected the hard drive incorrectly, you'd get a blank screen. If you've removed the hard drive for any reason, and re-attached the ribbon cable upside-down, or to the left, instead of the right, whatever, that's what would happen. Grasping at straws, but something to try. Hope you find it.
                  Kevin900

                    Comment

                    Previous template Next
                    Working...