C- D203 Bizhub600

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mirava
    Junior Member
    • Apr 2010
    • 3
    #1

    C- D203 Bizhub600

    Hello
    I identified the problem as being generated by the NVRAM, after I replaced it with another NVRAM. The meter now displays with the old NVRAM 9999999999999.
    Can someone help me with a CF card for parameter copy, or files contained therein?
    Thanks in advance
    Tags: 999, advance, back, bad, bizhub, bizhub600, cf card, copier, copy, d203, displays, era, files, firmware, genera, generated, help, meter, nvram, old, parameter, replaced
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      If you are sure it's a bad RAM, you must get the new NVRAM from KM. You can swap them around for testing, but a new one will be clean. There is a method to wipe the CF card clean and put the base firmware back on the card or use a new CF card. Emujo
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • mirava
          Junior Member
          • Apr 2010
          • 3
          #3
          I checked the copier with a new NVRAM. Everything is good ok.CF card, as well as the firmware.What Im looking for is a particular CF (tool), or files cotained.This software is used for copy parameter memory,rewriting data that an NVRAM target

            Comment

            Previous template Next
            Working...