15 results in 0.0339 seconds.
-
Seeking Bizhub c454e firmware
I have a BizHub c545e and the firmware is older. I hear that the SLEEP and POWER settings on the most recent firmware sometimes behave better, so I'd... -
c364e Animations, Firmware, Licensed options
Now that everything is working properly, I did an initialization on my c364e to get rid of some data from the previous owner and, of course, I now need... -
Slow processing
Hello everybody,
I have an issue with a TA5002i machine. The customer sends multiple .prn jobs and the printer takes a bit longer to print -
Ricoh MP4001 Fax # of Rings
Hey Folks! Happy Friday! Needing just a confirmation... I'm going out to change # of rings on a MP 4001... Is it SP2-103-7 Parameter 6, Then set to whatever... -
light image
i replaced a heat roller at a biz 350 and opc , blade, developer and spacers (all genuin) at a biz 223. At the beginning everything was ok . After two... -
MP201spf - No std paper set
Hi!
I need to set the second optional drawer in the A5 format in the MP201. Do you know if as in the previous mp161 with parameter 5112- (No std... -
3245C faxes recieved to file
This unit suddenly stopped printing faxes they are going into a standby file in which I canot locate . When i try to print any stored files it says there... -
konica 7155 "close front door" message
adu driver pwb, print and system pwb, front door switches and memory parameter board all have been replaced...also dc power supply. door switches activate... -
C- D203 Bizhub600
Hello
I identified the problem as being generated by the NVRAM, after I replaced it with another NVRAM. The meter now displays with the old... -
MP171F - Defaulting Fax method type to H.323
Hi,
Just wondering if anyone knows how to default the fax method on a MP171SPF to H.323 (IP Fax) as opposed to G3?
I have... -
MP 171spf fax forwarding to folder
MP 171spf fax forwarding to folder
If the PC (where the folder was created for fax forwarding)is turn off, the incoming fax will not be... -
[XEROX DC440] Problem with the margins
I have a problem with the margins. the copy goes out moved of 5 millimeters in comparison to the original one. how can I resolve this problem? which is... -
C250 Parameter Chip (IC6)
Hi guys,
Anyone know how crucial the information contained inside the Parameter Chip is ?
I have a couple of C250's which were slowly being... -
bizhub c250 parameter chip
The parameter chip (ic6) of the mechanical control board of a c250 has been lost and we need to replace it. I bought a new chip and the machine boots... -
Panasonic UF-890 total counter
how do I get the total page count out of a panasonic UF890, some of them print it on the status page and this on does not?????
