3102 "Please install the correct imaging unit correctly"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • captain1976
    Technician

    50+ Posts
    • Jul 2008
    • 79
    #1

    3102 "Please install the correct imaging unit correctly"

    This is new to me. First the yellow now both yellow and cyan. Both still show life left in the unit life indicator. Even tried both units with even more life from another "same exact model" machine.

    I can't find anything in the service manual. Can anyone help here?

    Thanks
    Tags: 102, 310, 3102, cf3102, connections, cyan, even, exact, help, imaging, imaging unit, install, lef, left, life, manual, mcb, model, ops, service, service manual, show, stall, stalling, thrust, unit, units, work, wrong, yellow
    • costel fasola
      Technician
      • Jun 2010
      • 69
      #2
      cf3102

      dear friend

      change resset chips if u want to work

        Comment

        • Stirton.M
          All things Konica Minolta

          1,000+ Posts
          • Oct 2009
          • 1804
          #3
          Likely a harness issue or the control board has failed. Check connections through from the harness to the MCB in the back. Replace the board if the harness checks out.
          "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
          ---Groucho Marx


          Please do not PM me for questions related to Konica Minolta hardware.
          I will not answer requests or questions there.
          Please ask in the KM forum for the benefit of others to see the question and give their input.

            Comment

            • costel fasola
              Technician
              • Jun 2010
              • 69
              #4
              Originally posted by Stirton.M
              Likely a harness issue or the control board has failed. Check connections through from the harness to the MCB in the back. Replace the board if the harness checks out.
              is no problem with boards thrust me... reset chips on the units or put equipment on new chips are already used on other equipment stations .

                Comment

                • Stirton.M
                  All things Konica Minolta

                  1,000+ Posts
                  • Oct 2009
                  • 1804
                  #5
                  Originally posted by costel fasola
                  is no problem with boards thrust me... reset chips on the units or put equipment on new chips are already used on other equipment stations .

                  Did you not see this part in his post????

                  Originally posted by captain1976
                  Both still show life left in the unit life indicator. Even tried both units with even more life from another "same exact model" machine.
                  He had already swapped out the units from another machine, standard procedure. If the unit life indicator is showing life, then that is not what is wrong. What is going on is that the machine is not registering the IUs as installed, and when known good units are installed and the same issue is present, the only place left to look is the harness or MCB.

                  The only thing that happens when installing a new IU is a logic latch is set on the chip of the IU while at the same time the life counter is also reset. This does not resolve an issue that he has, which is the machine is not registering the presence of the IU, even when they are swapped out.
                  "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
                  ---Groucho Marx


                  Please do not PM me for questions related to Konica Minolta hardware.
                  I will not answer requests or questions there.
                  Please ask in the KM forum for the benefit of others to see the question and give their input.

                    Comment

                    • costel fasola
                      Technician
                      • Jun 2010
                      • 69
                      #6
                      I had this problem. I know what I'm talking.must make chips for the old station stops us to stay with the same device chips or chip reset

                        Comment

                        • remati
                          Trusted Tech

                          100+ Posts
                          • Apr 2010
                          • 149
                          #7
                          ...but ,I think that the best is change de units with new one...no reset

                            Comment

                            • captain1976
                              Technician

                              50+ Posts
                              • Jul 2008
                              • 79
                              #8
                              Originally posted by Stirton.M
                              Did you not see this part in his post????



                              He had already swapped out the units from another machine, standard procedure. If the unit life indicator is showing life, then that is not what is wrong. What is going on is that the machine is not registering the IUs as installed, and when known good units are installed and the same issue is present, the only place left to look is the harness or MCB.

                              The only thing that happens when installing a new IU is a logic latch is set on the chip of the IU while at the same time the life counter is also reset. This does not resolve an issue that he has, which is the machine is not registering the presence of the IU, even when they are swapped out.

                              Thanks, I'm going to get another cable from some parts machines I have in the warehouse. Will give them a try tomorrow and go with a board change if that doesnt do it.

                              Appreciate the help

                                Comment

                                Previous template Next
                                Working...