If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Problem is definitely in upper unit. Replaced sensor, brackets dont seem bent, and shutter seems to rotate fine. Switched upper unit with another machine...
This machine is doing some odd things,started off by doing no fusing to the rear of the machine about 2 inches from the rear edge.Has the odd E001-001...
3102 "Please install the correct imaging unit correctly"
This is new to me. First the yellow now both yellow and cyan. Both still show life left in the unit life indicator. Even tried both units with even more...
Can anyone help on this. The machine gives a very loud gear grinding noise shortly after switch on or during a print cycle. If the fuser is disconnected,...
Hi, Due to a very recent split in our small copier servicing business with 2-3 techs I have been thrust into the role of Service Manager.In other words...
Our company have just taken on a dealership with Sharp and we have had a MX2600N thrust upon us in a regional office. have figured out how to set up scan...