If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think this is the second post you left without a machine description.
I'm not giving you any answers anymore until you get that point.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
This particular code, to clear, requires to turn off the main power switch. Do not use the "sub power", it is not the same thing.
In the case of a recurring failure, you may have to go deeper. I have yet to see this type of error on any machines I work on. The manual does not reveal any "fix" aside from the power switch.
The drive itself may be failing but to know, you can try formatting the drive. Use logical, it is reasonably fast. The other choice takes forever.
Swapping the drive will reveal if it is the drive, or the PRCB that is failing.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Hi guys... I can't put toner into my copier. Can you help? Please!! I need to make copies NOW!! lol
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
Comment