Minolta CS Pro EP5000 Service Mode

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • denis stokes

    #16
    Originally posted by deep
    If the spare unit is in condition and the copy quality is good, no adjustment is necessary.

    If bad copy was found (too dark or too light), you have to carry out Auto and Manual Exposure adjustments.
    Thanks for the info.
    Can someone tell me what the two switches are for on the side of the transfeer unit. the switches are marked "drum" and Paper.
    Dennis

    Comment

    • deep
      Trusted Tech

      100+ Posts
      • Jun 2008
      • 208

      #17
      The switches are for Drum Dehumidifier Heater and Paper Dehumidifier Heater and may be OPTIONAL to some countries.
      Kenny

      Comment

      • denis stokes

        #18
        Originally posted by deep
        If the spare unit is in condition and the copy quality is good, no adjustment is necessary.

        If bad copy was found (too dark or too light), you have to carry out Auto and Manual Exposure adjustments.

        Dear people.
        I have a Minolta Di151 photo copier, does anyone know if there is a PC interface for this machine ? if so where can one be obtained from.
        Regards
        Dennis Stokes

        Comment

        • faudhi

          #19
          Code : M3

          Hi Friends..
          Now I am facing problem with Photocopy I need your help about Minolta EP5000 with message on the screen is "Preventive Maintenance Time ! Please Call Your Technical rep. and Provide the following Code " CODE : M3...

          Help me Please How to clear this message...
          Thankyou For your Attention...

          Faudhi.

          Comment

          • Mark B
            Trusted Tech

            100+ Posts
            • Jul 2006
            • 153

            #20
            The way I would clear that code is by putting the machine in the dumpster and buying a new one!!!!!!!!!!!!!

            Comment

            Working...