I agree 100% with Rudi... The Di151 is a dog - woof - woof - but it has three redeeming features :
1) Two people can easily carry it to the industrial bin
2) It should make a satisfying 'bang' when it hits the bottom
3) There is not much to smash up, so it shouldn't take long.
Enjoy!
-
Hi
You Have To Replace The Whole Clutch Assembly Too And Try Replacing The Solenoid Again I Have Had Faulty Ones Brand New From The Shelves As For Kicking The Customer Please Dont I Think They Are 10 Times More Frustrated Than What You Are Because That Is The Worst , Shi? Any Company Could Have Ever Made .
Good Luck And Dont Sell Them A Di 1610 Or A B160 They Are Just As Bad Rather Go For The Di1611 , B162 Or The B163.
RegardsLeave a comment:
-
di151
ok so here is my issue and its probably a easy fix, but expensive. i have a di 151 that just keeps shooting out paper. it never stops . once it runs out it just keeps going. i have replaced the solinoid and the sensor but the problem is still there. i have come to the point were the best fix is kick the cust. in the head then through the machine from a high roof somewhere making sure it shatters. any clues
Leave a comment: