Same thing happened here, fortunately we got them just before the customer started pushing the thing out the door. Amazing the difference, like a new machine.
-
-
C2212 & C2213
From what I remember I think the c2212 and c2213 codes are due to the cleaning blades on the drums, they flip backwards while doing a registration.
the problem is Lack of lubrication ( IE SETTING POWDER ), When I did the PM'S on these machines I used a lot of setting powder on the drums as I replaced them, rotating the drum several times.
So if you get these errors remove the transfer belt and pull each drum out, if you have setting powder apply across drum.
ColormethisComment
Comment