I'm getting intermittent jamming on a bizhub 352 with these jam codes the feed tires in this machine were just replaced 2 days ago and they are getting the same jams. any ideas take up and feed and ranspport sensors all work in service mode can see no physical blockages..any ideas?
-
-
When the pf rollers were replaced, were the 1-way clutches replaced? See page 38(2nd cassette paper take-up section) call out #10 in the C352 parts manual. There is a new clutch part# A00J563500 that works better. Clean the shafts w/alcohol and scotchbrite them as necessary. If these clutches slip you get no feed.
Comment