Bizhub C35

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • suomi
    Trusted Tech

    100+ Posts
    • Oct 2008
    • 152
    #1

    Bizhub C35

    ghost jam tray1. Bypass OK. Any ideas. This is really nightmare...
    I think this machine is really unsuccessful.
    Tags: bizhub, bizhub c35, bypass, bypass tray, c35, ghost, incorrectly, jam, parts, tray, tray1, unsuccessful
    • aesthetics1
      Trusted Tech

      100+ Posts
      • May 2010
      • 148
      #2
      You mean "Tray 2?" As they have annoyingly labelled the bypass on this machine as "Tray 1".... Many headaches with this machine - really not what they made it out to be. Lots of cheap parts and firmware issues.

      Have you tried updating the firmware, or sending back the board? KM is still doing free replacements on the older boards bought before (I believe) sometime in feb/march?

        Comment

        • Mr Spock
          Vulcan Inventor of Death

          1,000+ Posts
          • Aug 2006
          • 2064
          #3
          There is also an issue with the reg clutch having the wiring routed incorrectly. Dealers should be able to get the bulletin and FOC parts to fix.
          And Star Trek was just a tv show...yeah right!

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              I have had many customers complain of tray 1 jams...100% of the time it is operator error. On the C35, the user must push the bypass tray paper platform down before loading paper (thus the big hand symbol on the tray). Not sure why any manufacturer would label the bypas tray "tray 1" though. PS..How you doing Mr Spock? Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                Previous template Next
                Working...