Bizhub C450 - Malfunction C11A4

[dudley]

if the black exit belts are hooking the white plastic parts, then the belts need to be tightened up. Open the top door and look down to the plate between the belts and there will be a screw. Loosen the screw and the belts will be tensioned up by springs in the assembly. Thighten ithe screw back down and away you go.

[misery90]

Re: Bizhub C450 - Malfunction C11A4

if the black exit belts are hooking the white plastic parts, then the belts need to be tightened up. Open the top door and look down to the plate between the belts and there will be a screw. Loosen the screw and the belts will be tensioned up by springs in the assembly. Thighten ithe screw back down and away you go.

This is the problem and the solution. I've been banging my head on this for a week now.

Thanks!

[dudley]

Re: Bizhub C450 - Malfunction C11A4

flash from the past when life was easy (working on production stuff only these days) I miss those good old day glad to help