DI 450 c1440 and 1441 codes

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nmfaxman
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2008
    • 1702
    #1

    DI 450 c1440 and 1441 codes

    Memory checks good and not print controller ever installed.
    Have replaced ccd unit and checked connectors to to pwb-IA and all outputs from PS show good.
    Repairing it for church for free so I don't want to put a lot of money into it.
    Anyone have any ideas?
    Why do they call it common sense?

    If it were common, wouldn't everyone have it?
    Tags: 450, ccd, code, codes, controller, good, memory, print, roller, unit
    • Hansoon
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Sep 2007
      • 3388
      #2
      Re: DI 450 c1440 and 1441 codes

      Mirrors knocked out of position and/or dirty? Platen glass sitting right and clean (especially the underside with the white strip)? Any sources of false light entering optics?

      Hans
      “Sent from my Intel 80286 using MS-DOS 2.0”

        Comment

        • nmfaxman
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2008
          • 1702
          #3
          Re: DI 450 c1440 and 1441 codes

          Checked mirrors and sensors before I pulled CCD unit.
          Sent ccd to Hytech and they said it was good.
          Pulled and reset all connectors on ccd and pwbIa.
          It was working before it was moved, but I don't see any physical damage.
          Why do they call it common sense?

          If it were common, wouldn't everyone have it?

            Comment

            • mitchl
              Senior Tech

              Site Contributor
              500+ Posts
              • Apr 2007
              • 501
              #4
              Re: DI 450 c1440 and 1441 codes

              Make absolutely sure that one of the mirrors isnt out of place, wiggle the suckers around and if your sure their good to go try......... I know you said it didn't have a controller but just for shits and giggles take off the glass and in front of the lens is a rectangular panel remove the 4 screws and verify there's nothing in the memory slot if there is yank it. If this doesn't help I would suspect you have a problemo with the IF board or better known as PWB-B. I'll ask a few of my techs if they can remember seeing this before which I think we have and it turned out to be the IFB.

                Comment

                • nmfaxman
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2008
                  • 1702
                  #5
                  Re: DI 450 c1440 and 1441 codes

                  Here are some samples of prints and copies.
                  Attached Files
                  Why do they call it common sense?

                  If it were common, wouldn't everyone have it?

                    Comment

                    • nmfaxman
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Feb 2008
                      • 1702
                      #6
                      Re: DI 450 c1440 and 1441 codes

                      Turned out to be bad CCD.
                      Why do they call it common sense?

                      If it were common, wouldn't everyone have it?

                        Comment

                        Previous template Next
                        Working...