Develope ineo750-C1137

[Gleq]

Hi
A client has reported of code- C1137 any help will be apprciated
thanks

[RockETop]

You have a bad FNS board and /or a slow M5 motor in your finisher. I had to replace both. Make sure you have updated parts list for your FNS as the numbers have changed.

[Gleq]

rocketop
ok i will check it morrow and give you feed back
thank you bro...

[David Morrison]

Re: Develope ineo750-C1137

You have a bad FNS board and /or a slow M5 motor in your finisher. I had to replace both. Make sure you have updated parts list for your FNS as the numbers have changed.

I almost ordered these parts today, but I looked up the code in Lotus Notes and stumbled across a different solution. There was scraps of paper jammed in the paper path just before where the paper goes into the stacker. I was lucky to discover that because I was there last week and printed over 150 pages with no problem. The customer said it would jam as soon as I leave. Well, when I tested it last week, I didn't use the stacker (stapling and sorting), but when I left, they did.