20 results in 0.0176 seconds.
-
It shouldn't work....but it does
How's this for weird. I recently "refurbished" a C658 to go out on rental, the customer wanted an FNS, but we didn't have an FS536, only an... -
bh c451 with fs-519 jamming at exit
I have a fs-519 finisher and it will randomly not kick the paper all the way out befor the nex pages get there.
on a 20 page job it stacks 5 and... -
BZ950 fns exit tray restriction when stapling
Hi all, I have a 950 fitted with a FS618 (I think) which says empty fns tray after a certain amount of stapled sets have exited. I understand this is... -
Konica minolta c500 pro (sc77-25 code)
Working on a konica minolta pro c500 that keeps jamming out just as it enters the finisher. Labored over it for hours till it finally gave me a sc77-25... -
FS-609 Prob
Good afternoon all!
I was working on a C353 with a Fs609 (I think) attached.
When they were doing fold and staple jobs it would... -
Bizhub C550 & FS 608
Have you seen this code C1114. Motor & sensors are OK.
maybe fns drive board
-
Pro950 J72-17
I have a 950 with FS528 - PK505 ... Customer prints out forms on 8.5x11R, double side, two-hole punch on top.
The copier will give a false... -
BIZHUB 920
Have a 920 when copying or printing 11x17 sort mode it throws some of the sheets to the floor. Kind of flying towards the rear of the finisher as it comes... -
FS-110, FS-210 Stapling Alignment Issue...
Hi Everyone,
I'm having trouble with the staplers on the KM 7210 and 7272 finishers. It seems the guides that tap the paper when they drop... -
T1 finisher jams
i have a 5570, with a t1 fins. intermittenly gives me a 1104 jam. have checked canon site. everything they suggest doesnt seem to be an issue. seems as... -
dl850/7085 j73-15
have a dl850 with PU108 and jam code j73-15. Says to clear area 20. When i go into 47 mode it will not see 076 input for ps1 or ps8. I have good ac to...Last edited by pudgi300; 12-01-2009, 06:34 PM. -
Visioneer Announces NetScan 4000 Network Document Scanner
Visioneer, Inc., a leader in intelligent document imaging solutions, today announced the NetScan 4000 : http://cts.businesswire.com/ct/CT?id=smartli... -
Bizhub c352 now with c1180
Had a c1190 caused by stapler being blocked out-of-position lift plate. I disconnected finisher(fs-514) but code is now c1180 and did not reset with off... -
7075 Finisher Fault F77-15
I've had this problem on three different machines and have come to fear this fault code. The finisher FNS Conveyance motor doesn't come on and the sheet... -
Need Info on Konicaminolta di5510 code SC77-03
I have a Di5510 w/ FS-110, can anyone help me with this services code 77-03.
Thanks.
