Does anyone know if the Oce uses the same firmware as the Konica Minolta?
-
-
Re: Variolink 3622c / Konica minolta C360 firmware
Highly doubtful. -
Comment
-
Re: Variolink 3622c / Konica minolta C360 firmware
Turns out the KM firmware works fine in this Oce. Just had to make a couple of dip switch settings and all is good.Comment
-
Re: Variolink 3622c / Konica minolta C360 firmware
It took you three years to load firmware? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Variolink 3622c / Konica minolta C360 firmware
I focus on quality.
I just asked this same question last month, and thought this was the post. Can't find it elsewhere (?). Er, maybe I asked about the C280 and Oce 2822c. Oh well, same difference.
Well, if anyone is ever interested, the Konica Minolta firmware also works in their Muratec counterparts.Comment
Comment