New HDD on Fiery IC-406 (X3ety 30c-km)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Methmann
    Technician

    50+ Posts
    • May 2009
    • 72
    #1

    New HDD on Fiery IC-406 (X3ety 30c-km)

    Hi everyone

    I have a Fiery IC-406 (X3ety 30c-km), sitting on a Konica Minolta Bizhub C352, where the harddisk has broken down. So i have to install a new harddisk to the fiery. But i have only tried to install the system software to a older fiery, via parallel cable.



    I have the iso files with the system software(Ver. 1.01), so how do i get it to the new harddisk? I hope anyone can help me with a procedure? :-)


    Thanks in advance.
    Tags: bizhub, c352, fiery, hdd, install, konica, konica minolta, minolta, software, system
    • Methmann
      Technician

      50+ Posts
      • May 2009
      • 72
      #2
      Re: New HDD on Fiery IC-406 (X3ety 30c-km)

      Nevermind. I think i have found the procedure, tried to mount the first iso file. And voila, a fine installer came, with the option to install via usb or ethernet cable. Nice :-) i thought it was much more complicated.

        Comment

        • RRodgers
          Service Manager

          1,000+ Posts
          • Jun 2009
          • 1947
          #3
          Re: New HDD on Fiery IC-406 (X3ety 30c-km)

          I usually burn it to a disk then copy the installer onto my local hd. Then run it. Don't have an IP on the computer you are using for the install and use a crossover. Be sure tp add the patches as well GL
          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

            Comment

            • Methmann
              Technician

              50+ Posts
              • May 2009
              • 72
              #4
              Re: New HDD on Fiery IC-406 (X3ety 30c-km)

              #3 Okay, thank you :-)

                Comment

                • dunero
                  #5
                  Re: New HDD on Fiery IC-406 (X3ety 30c-km)

                  Hi, I have a fiery x3ety installed on KONICA MINOLTA BIZHUB C300, fiery is in French and I want to change the language, but I do not know where and how (I have not the fiery CD`s), could anyone make an image after CD`s

                    Comment

                    Previous template Next
                    Working...