Konica PPLM USB firmware?

[bronco31]

Re: Konica PPLM USB firmware?

thanks emujo..
so unzip the tar to a USB flash drive... then power up the copier with it plugged in?
do we still have to set those dip switches to disable the message for the specific components?
thx again!

frank

[Jtogmid]

Re: Konica PPLM USB firmware?

Hi all,

Please send me link where can i download PPLM FIRMWARE?

email: cassinitron@gmail.com

Thanks in advance.

[Jimb123]

Re: Konica PPLM USB firmware?

Anyone knows how to get the PPLM Firmware for c280? I got a problem here. Tech replaced Drum Unit. But because of very High Drum Unit count, the new Drum Unit is detected as L4 Error after only 1 week, preventing me from copying. Tech somehow doesnt want to reset Drum counter, saying he doesnt really know how to. Additionally, he says the older Drum Units are still perfect and could be used, but because of c280 age detection I am forced to replace them.

When entering Service mode, I can only reset Fusion etc (by setting a "New Release") but Drum Unit count is never resetted and it is basically not selectable. Is there a proper way/tutorial how to reset the counter? I dont really want to throw away the older Drum Units, since they were tested and still perfectly in shape, but c280 blocks any copying and usage when it decides to give me L4 Error.

Can someone kindly help me out with this issue, how to reset drum unit counter? Paying full price for a new drum unit is way too much, especially when this error re-appeared after only 1 week, and after tech even confirmed the older drum units are in perfect shape.

[copier tech]

Re: Konica PPLM USB firmware?

Anyone knows how to get the PPLM Firmware for c280? I got a problem here. Tech replaced Drum Unit. But because of very High Drum Unit count, the new Drum Unit is detected as L4 Error after only 1 week, preventing me from copying. Tech somehow doesnt want to reset Drum counter, saying he doesnt really know how to. Additionally, he says the older Drum Units are still perfect and could be used, but because of c280 age detection I am forced to replace them.

When entering Service mode, I can only reset Fusion etc (by setting a "New Release") but Drum Unit count is never resetted and it is basically not selectable. Is there a proper way/tutorial how to reset the counter? I dont really want to throw away the older Drum Units, since they were tested and still perfectly in shape, but c280 blocks any copying and usage when it decides to give me L4 Error.

Can someone kindly help me out with this issue, how to reset drum unit counter? Paying full price for a new drum unit is way too much, especially when this error re-appeared after only 1 week, and after tech even confirmed the older drum units are in perfect shape.

Happy to help with this firmware. Once updated you can then disable the 'end of life warnings'