KonMin C220

[Darren King]

I am working on a KonMin C220 that is skewing when copying from the glass and DF but not when printing. I know on some of the older machines you could just kinda give it a chiropractic adjustment by lifting on the left corner of the scanner bed, but, this one seems pretty tight. I was wondering if anyone knows if there is a mechanical adjustment for this. It is skewing from both trays and the bypass in landscape and portrait so I am pretty sure it isn't a tray problem. I stopped the paper at the reg roller and it is straight there. Any help is appreciated.
Thanks
Darren

[emujo]

Re: KonMin C220

There are 4 hard rubber spacers the lamp assy rides on..Check to see if one came off..We also see this when the frame has been twisted by our industrious delivery teams on install. Emujo